1. Mixing equipment
Mixing equipment is used in chemical supply, flocculation or mixing medicine, etc.

Feature
Design according to customer requirements
Impeller and shaft made of stainless steel (SUS304).
German SEW reduction gear.
2. Dissolved air floatation equipment (DAF)
Pressure flotation equipment (DAF) is to inject high pressure air into the air dissolution device, make the air saturated and dissolved in pressure water, and then release the saturated liquid in the pressure tank into intake tube. After decompression, the liquid mixture dissolved in air will release microbubbles, and the microbubbles will adhere to the surface of the floc in the water to form residue masses that weigh less than water. causing the floc to float on the surface of the water, effectively causing the solid and liquid to separate and float.

3. Electrochemical Fenton reactor (Fered-Fenton)
4. Liquid Fenton Reactor (FBR-Fenton)
5. Seeding crystallization reactor (FBC)
6. Fe/Mn contaminated wastewater treatment equipment using granular crystallization (FBC) method

7. Pressure sand filter equipment
8. Continuous Sand Filter Equipment
Suspended solids (impurities) in wastewater can be effectively removed by passing through the filter layer (sand) of a continuous sand filter tank. The filter can also take advantage of a portion of clean water after screening to continuously wash the filter layer automatically. After being cleaned, the filter sand can be recirculated and reused. This system can overcome the disadvantages of traditional sand filters (When the filter of a traditional sand filter is clogged, backwashing is required, but at this time the filter cannot filter wastewater (required). must stop the system). Although it is possible to switch to using the multi-filter method for replacement, it means increasing the cost of preliminary equipment and usable area, etc.). The continuous sand washing tank is a filtration system that does not require backwashing.

Application
Water treatment
In the wastewater treatment process
In the water reuse process
In industrial wastewater treatment
In domestic wastewater treatment
Paper mill wastewater treatment
Pharmaceutical factory wastewater treatment
Wastewater treatment of mining industry
Wastewater treatment of copper refinery plant
Steel factory wastewater treatment
Urban wastewater treatment
Feature
High and stable performance
Easy to operate.
Continuous operation does not require additional backwashing equipment such as tanks, pumps, and other equipment.
Applicable to wastewater with high SS.
Low power consumption compared to conventional sand locs.
9. Activated carbon adsorption device
10. Ion exchange device.